The Phaesun SMS 1 is a single module support structure with a tilt angle from 0° to 45°. It is designed for the mounting of one solar module.
Roof Hooks Frankfurter Pfanne Tiles
Material V2A with wide fixing strap for Frankfurter Pfanne tiles including stainless steel screw M10 x 25mm, self-locking nut with serrated bearing M10 for crosstie
profile rail.
Corrugated Sheet Roof Screw Fitting
For connections between crosstie profile rail and rafter consisting of hanger bolt M10, connecting plate, screws, nuts and V2A blocking screw.
Aluminum Profile
Carrier section for solar module, aluminium diecast profil bar, two groove for M8 nut´s 40x40mm.
Moduleclamp Middle T
Middle clamp to fix two solar modules at the profil bar.
Moduleclamp Side L
Edge clamp to fix the solar module at the profil bar.
Slotted Angle used worldwide for over 60 years in the construction of benches, display cabinets, safety screens, access platforms, fire barriers, security cages,
jigs, test-rigs and 1,001 other applications it‘s the indispensable, do everything construction system. Dexion Slotted Angle is quickly and easily cut to size and bolted together to form frameworks which can be readily modified or completely dismantled and the components re-used. Strong enough to last a lifetime and infinitely re-usable.And it is very easy to build a module support structure on demand in the field. You just need a saw and then you are able to customise a support structure in any angle you need.
Wall Mounting Brackets
Solid aluminium design for the wall assembly of small solar modules (5 and 10 Watt). The modules are assembled with a double sided adhesive tape. Delivery including assembly material.
Ground Structure
Solid aluminium structure for the safe installation of small solar modules. Particularly suitable if solar pump systems are involved. Optimum sun angle adjustment possible by means of a socket joint. Earth rod length 80 cm. The modules are fixed by with a double sided adhesive tape. Delivery including assembly material.
The Tracking units Etatrack have proven their reliability on all continents for years. They are made of single-axis technology with manually adjustable elevation angle (stepless 0 to 45o). They also feature asolid design and high lifeexpectancy without failures, as well as easy maintenance, thanks to quickly accessible drive. Up to 2.5 kWp, resp. 15 m2 module surface for each tracking unit is possible.Wind speeds of up to 150 km/h wind speed do not destroy them. The Etatrack can be controlled as single installations or central (for solar parks with up to several MW). The output can be increased up to 20-40% (depending on the location).
Standard modules can now be installed with the help of new Universal Assembly Fixtures. The assembly sets made of UV resistant PU plastics are optically attractive and can be assembled easily and quickly. Therefore, the module works more efficiently under direct irradiation during the summer months. The assembly sets are supplied in black. Junction profiles can be used for a better fastening of several modules. Additional spoiler profiles can be sticked alongside the total length which improve the aerodynamics of the assembled model and thus contribute to saving fuel.
This Roof Mounting Unit which can be sticked on, solves any problem related to the cabling from outdoors to indoors. The case consists of PU high-resistance foam with impact strength, weathering and UV resistance. It is absolutely waterproof and is supplied as a unit ready for assembly. The case contains a thread where the screwed cable gland is installed in order to seal the cable that is led through. It is as well possible at any time to lead the cable back and seal the case safely with a closing cap when the installation is dismounted. We recommend the Sikaflex jointing compound to stick the cable duct.
